Ac Resonant Test System - Oil-cooled Metal Tank Design, Up To 400kv & 35a Output | Efficient High Voltage Testing Solution For Cables, Transformers & Switchgears

AC Resonant Test SystemTesting of certain apparatus requires much high voltage or current that a straight AC test system is not sufficient. Thus resonant test reactor with a variable core is needed. The main advantage of such test systems is lower input power and larger output power. The resonant test system is designed to compensate capacitance in the testing circuit precisely by tuning inductance of the test system. The natural resonance frequency of the test system matches feed-in mains, usually 50/60Hz. When the test system gets in resonance, it generates continuous testing high voltage.AC resonant test system is used for factory testing of middle, high and ultra-high voltage cables, capacitors, generators, motors, power transformers and gas-insulated switchgears.The resonant test systems can be either in insulation cylinder type or metal tank. Insulation cylinder reactors are in module and can be stacked to connect in series parallel to get much higher voltage or current. Additional voltage taps are possible for metal tank reactors. The output voltage is fed out through the tap-changers by HV bushings. This kind of reactors extend application range, and satisfy testing for cables of various voltage class.Metal tank type HV Reactor is oil-cooled which is installed in a tank made of steel. The high voltage is fed outward through the steel tank via a HV bushing. The reactor can be fitted with additional voltage taps (bushings) to achieve largest testable capacitances of test objects at lower test voltages.Model No.StructureMax voltageMax currentXZLSingle unitupto 400kV35AApplicationFor routine testing of medium and high voltage cables up to 400 kV in accordance with IEC 60502 und IEC 60840For routine testing of high voltage capacitors up to 60 kV in accordance with IEC 60871For routine and inspection testing of generators and motors up to 60 kV in accordance with IEC 60034Cylinder type HV Reactor is oil-cooled which is installed in a closed container made of steel and insulating cylinders. The module setup enables you to connect the reactors in series or in parallel for extending the range of voltage and/or current. The individual modules can be installed above or next to one anotherModel No.  Structure    Max voltage  Max current XZLSingle unitupto 400kV35AXZLCascadedupto 2000kV35AApplicationFor routine testing of high and ultra-high voltage cables up to 800 kV in accordance with IEC 60840 and IEC 62067For inspection testing of high and ultra-high voltage cables and cable assemblies up to 1600 kV in accordance with IEC 60840 and IEC 62067For applied voltage testing of power transformers up to 1600 kV in accordance with IEC 60076For testing of gas-insulated switchgears up to 1600 kV in accordance with IEC 62271-203For testing of voltage transformer including testing with higher frequencies and performing dynamic tests up to 1600 kV in accordance with IEC 60044Main components:HV reactorHV power filter (also Capacitive Voltage Divider)Exciter transformerVoltage RegulatorControl and Measuring System (manual operation or computer-aided automatic systems)Additional features and accessories:Resonant circuits with variable frequencylow voltage power filterPartial discharge (PD) measuring system including blocking impedance)Compressed gas capacitorCapacitance and dissipation factor measuring instrumentMoveable designMade solution upon customer's request