Sbr Latex Bonding Agent

SBR Latex Bonding AgentOur organization offers the advanced polymeric bonding chemical to meet the variegated applications required in order to give a complete repair cum bonding properties to steel and RCC structures.   PRODUCT SPECIFICATION / COMPLIANCES: Color: Milky white.Form: Liquid emulsion.Appln. Temp.: 0.55 C.Service Temp.: - 40C to + 90 C.Pot life: Approx. 45 minutes. PRIMARY APPLICATIONS: Helps achieving,. Bonding new concrete to old concrete.  Fixing ceramic tiles,  Floor screeding and mosaic tiling. Crack repair and porous surface sealing. By using KR SBR Latex the conditions created due to breeds of termites are avoided. Healthy conditions prevail and discomfort is eliminated. PRODUCT FEATURES: Excellent adhesion to most building substrates.Improves flexural, tensile, and thin section fragility of cementations system.Gives a tough, hardwearing surface with effective waterproofing.Reduces chloride / salt penetration in marine environment,Self-curing, Increases overall structural durability. Surface preparation of the substrate is vital for the effective adhesion and bonding of  Cmix SBR Latex. So, the surface should be free of laitance and loose dust particles, oil, grease and other loose dirt. The surface should be wire brushed and broomed before application. The performance of KR SBR Latex, whether patches, renders, screeds, toppings or slurry only, is dependent on the substrate Preparation: Depending upon the structural condition, preparation should be done. The basic idea is that the substrate should be clean, sound and free from any deleterious material. The unevenness of the surface should be leveled. The corroded reinforcement should also be made clean and all loose particles should be removed. Barrier coat Prepare a slurry coat of cement- KR SBR Latex mixing them at a ratio 1:1.5. The slurry has to be applied on the repaired surface with a soft 4-inch plastic this tle brush in one direction. Allow this first coat to air dry for about 4 hrs. Do not spray any water on it. Apply a second coat of the slurry in the direction of right angles to the first coat. Allow this coat to air dry overnight, and do not spray any water or walk over the surface. After about 12 hours of air drying of the second coat, sprinkle little water on the coating at an interval of 2 hours. Continue this for 48 hours. The surface can then be put to use. We suggest conducting a pond test in order to ascertain the Effectiveness of KR SBR Latex. In case of improper waterproofing at a particular spot, a touch up coat of the KR Polybond  and Cement mixture should be applied over the particular area and must be allowed to cure. PACKAGING 10/30/50 kg HDPE. SHELF LIFE 12 months in un open. STORAGE Keep away from direct sunlight. COVERAGE 1 Kg of KR SBR Latex and 2 Kg cement system approximately gives average coverage of ~30 square feet as a slurry coating after mixing with cement. TECHNICAL SERVICE: We have established ourselves in different fields on the basis of its dependable technical service. For this purpose, we maintain a well equipped laboratory for research & quality assurance of all products. On call and would always be available for product demonstrations and product performance monitoring. SAFETY PRECAUTIONS: KR SBR Latex  is non toxic and non-flammable. However, any splashes on the human body must be washed with plenty of water.