White Silicone Rubber For Silicone Soap Molds

We are one the leading manufacturer, exporter and supplier a myriad collection of Silicone Rubber For Silicone Soap Molds in Shenzhen, Guangdong, China.

Application of silicone rubber for silicone soap molds
HY-E625 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 . It can cure at room temperature as well as under heat . ItAcA A s a kind of food grade silicone and mainly used for mold making.

HY-E625 silicone rubber is mainly used for making molds of concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .

Datasheet of HY silicone rubber for silicone soap molds
ModelE615E620E625
AppearanceTranslucentTranslucentTranslucent
Mixing Ratio1: 11: 11: 1
Operate Time (Mins25A A C)2~32~32~3
Curing Time (Mins 25A A C)303030
Hardness (AA A )15A A 220A A 225A A 2
Density ( g/cm 3 )1.081.081.08
Viscosity (CS) (Part A)10000 A A 200020000 A A 200022000 A A 2000
Viscosity(CS)(Part B)5000 A A 5005000 A A 5004000 A A 500
Viscosity (CS) (After mixed)12000 A A 200012000 A A 200010000 A A 2000
Tensile-strength( kgf /cm 2 )35A A 546A A 544A A 5
Tear-strength (kgf /cm )10A A 211A A 212A A 2
Elongation-break(%)430 A A 50460 A A 50490 A A 50
Retractility (%)AcA A 0.1AcA A 0.1AcA A 0.1

Characteristics:-
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Lo