3d Sublimation Mobile Cover Printing Machine Molds

We hold expertise in supplying a wide range of 3D Sublimation Mobile Cover Printing Machine Molds in Visakhapatnam, Andhra Pradesh, India.


Technical specifications
measurement 685 x 545 x 400mm
cbm 0. 15 cbm
gw 20kg (44lb)
nw 16kg (35lb)
power 2600w
voltage 220 v
working area 300 x 420 x 110mm
(11. 8 x 16. 5 x 4. 3inch)
up heating 1200w
down heating 1200w
vacuum pump 150w
max vacuum -640mmhg
vacuum flow 33l/min

Operating instructions
For best results, the 3d sublimation machine should be placed on
A level, clean, stable, well-ventilated work area free of flammable
Materials. It is recommended that the unit be plugged directly
Into an ac power outlet.
When operating the machine, heat protection gloves should be
Worn at all times to prevent serious burns or other injuries.
Please keep the machine dry and away from water.
Removal from box
1. Remove the 3d sublimation machine carefully from the box
2. Inspect all cabling, wiring and machine body to ensure the unit
Has not been damaged in transit.
3. Set unit on a clear table that is strong enough to support your
Working environment and the weight of the machine.
Cabling
1. The 3d sublimation machine comes with the vacuum unit installed
Inside the main unit. All cables are connected inside before shipment.
2. The power cable and vacuum exit hose need to be attached.
3. Plug in power cable to an ac outlet.
Removing the vacuum press tray