Air Conditioner System Trainer

Complete Ducting made of PC or Acrylic to visualize and identify the components in working

Mixing dampers: Mixing dampers with electrical actuator and position indication. The system includes 3 dampers: outdoor air mixing air and exhaust air

Total Equipment Should be skid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted parts also made of SS-304

Air duct with transparent front

Air duct with fan air cooler humidifier flaps air heater and sensors

Chamber with wet (latent) and dry (sensitive) heat source as cooling load

Air-cooled condensing unit

Power consumption: 140W at -10C

Refrigeration capacity: 320W at +5/40C

Humidifier

Heating power: 400W

Air heater

Heating power: 360W

2 heaters in the chamber as cooling load

Power output: 0-250W each freely adjustable

Flow cross-section of the air duct

Refrigerant: currently available in the market

Filling volume: 12kg aprox

CO2-equivalent: 08t

Measuring ranges

Temperature: 0-50C

Rel. humidity: 10-90%

Power consumption: 0-600W (condensing unit)

Power: 2x 0-300W (cooling load)

Pressure: -1-9bar / -1-24bar (refrigerant)

Flow rate: 15-235L/h (refrigerant) Air velocity: 0-25m/s

Required for operation 230V 50Hz 1 phase

Touch screen based Fully automatic system with password protection

Data acquisition should be Remotely operated by Smart phone Tablets PC laptops via Ethernet and Wi-fi

Should be equipped with all safety protections

Flow visualization should be available in the DAQ System

Should be equipped with both manual and auto operation

Power consumption of individual system all sensors data should be display and logged automatically

System should have software for operating data logging processing and data displaying

Performance variables (e.g. Heating/Cooling COP Heating / Cooling load etc..) should be automatically calculated and displayed

and should be stored in pen drive also along with PC.

Instruments should be provided with 3D drawing of complete equipment along with the name and make of all standard components used in the test rig

Each rig should have small aesthetically appealing poster with schematic diagram and basic working detail