Auto-3d Punching Holes Machine - 50x120mm, 3000kg Weight | Precision Control, Automatic Operation, Programmable Hole Distancing, Digital System

With intents to fulfill the necessities of the patrons, we are affianced in manufacturing, exporting and supplying a Auto-3D Punching Holes Machine in Taiyuan, Shanxi, China.

Machine introduction
Auto-digital controlled three direction and 6 working position of punching machine for C/U profiles, square pipe.

Features:
1. The distance between holes can be programmed.
2. Non accumulated error, precision less 1mm, excelled traditional production process.
3. The efficiency of Auto-punching production line can be equal 24 hours working.
4. Simple operating, only one operator.
5. The machine can work with program pre-set to punch 6 meter length, C lip, U /square pipe, from three direction in 6 sets punching dies in single or continuous, lower intensity of labor, quality protection, high efficiency.

Production process
Charge single work piece on table of machine------ Auto-clamp------- Auto-walk to preset position------feed work piece as programmed-------Auto-punch holes------ feeds in secondary ------- to punch side holes------ loosen clamp------discharge-----finish

Main specification

Machine mode:NLCU-6 3 Direction punching
Work piece :50 x120 mm
Work piece thickness: 2.5mm
Work piece weight: 30kg
Punching precision:A 0.5 mm
Feeding speed: 80/80 X/Y(m/min)
X/Y shaft stroke: 6000/1000mm
Jaw number:2
Digital control system: NL-PUNCH
Controlled shaft pieces:2 Shafts control
Working position of dies:6
Main hydraulic cylinder capacity:30Tons
Auxiliary hydraulic cylinder: 10Tons
System configuration:32 Bit MPU
Communication interface: RS232C/Storage card
Display on LCD
Power: AC 3P 380/440V-kVA20
Pneumatic source: Compressed air
Pressure: 0.2 m3/min, 0.55 MPa
Dimension of machine:LxWxHmm 10500x900x1200
Machine weight: 3 Tons