Automatic Self Cleaning Backwash Filters

Champion Automatic Filters are designed for continuous removal of suspended particles from all types of liquids.

Major Applications are in industrial plants using river, lake, well or sea water for cooling, descaling, bearing lubrication, spraying, quenching, and similar purposes.

Pipeline sizes:from 2a NB to 48a NB.
* No Limitations on Flow rates.
* No Limitations on Dirt Load.
* No Supervision required.

Installation
Installation is made on the discharge side of a pump or in any piping system operating under a positive pressure. The minimum working pressure required to effectively clean the straining media is 20 psi. The strainer is compact with small face-to-face, width, and height dimensions. Installation can be made in a horizontal or vertical pipeline.

Design
The strainer consists of a one-piece stainless steel cylindrical well screen drum with slotted openings ranging from .005" thru .075". Within the drum is contained a rotor, which is essentially a hollow rotating shaft- supporting two pads extended on each side. These pads are flush with the inside of the drum surface.

Operation
The liquid to be strained enters the inlet connection located in the lower portion of the body and flows upward into the inner surface of the drum. The suspended particles are retained in the media and the clean liquid passes through the media- leaving the body at the outlet connection located diametrically opposite the inlet.