Cnc Hydraulic Press Brakes - Is 2062 Gr. B Silicon Killed Mild Steel, 80mt X 2500 Mm To 500mt X 6000 Mm | Precision Synchronization To 0.01 Mm With Advanced Delem Controller And German Hydraulics

NuGEN Machineries Limited, leading manufacturer of Sheet Metal Working machineries in India. We offer CNC Hydraulic Press Brakes of Capacity 80MT x 2500 mm to 500 MT x 6000 mm. The tough, well dimensioned all welded structure is made out of IS 2062 Gr. B Silicon killed and ultrasonically tested mild steel plates to withstand continuous and minimum deflection under full load. The standard CNC Hydraulic Press Brakes comes with three Axes (Y1-Y2-X) Alpha Numeric Controller from Delem, advanced German Hydraulics, CNC Back Gauge and Standard set of Tooling. The Hydraulic Systems are specially designed for Press Brakes with Close loop controlled Proportional Valves for Synchronizing and Pressure Control. The Compact Manifold Block eliminates the Leakage Chances.
The high precision Imported Linear Scales are fitted on the Steel Frame attached to Machine Bed and it is independent of the side frame. This steel frame supports the sensors which takes positional readings directly from the Ram on the centre line of the Main Pressure Cylinder. The Scales are Self Aligned type fitted with Bearings which always give correct Position of the Upper Tool with respect to Lower Tool. These Scales are mounted on both sides of the Machine in combination with the Y1 and Y2 axes control, thereby providing accurate synchronization between the Cylinders to 0.01 mm.