Semi-automatic Fh18-65zds Automatic Can Tin Producing Machine

The machine is equipped with various protection measures, and when there is a fault, it will be automatically displayed on the touch screen and prompted to deal with it. When checking machine movement, programmable logic controller (PLC) input and output points can be read directly on the touch screen. The stroke of the welder table is 300mm, and the back of the welder is equipped with a table, which can be loaded by a forklift, reducing the time for adding iron. The rounding adopts the upper suction type, which has low requirements on the cutting size of the iron sheet, and there is no need to adjust the rounding machine material rack to change the can type. The can delivery tank is made of stainless steel integral tank. Change tank type quickly. Each diameter is equipped with a corresponding tank delivery channel. It only needs to remove two screws, remove the can channel of the can feeding table, and then put another can channel in, so that it only takes 5 minutes to change a can type. The machine is equipped with LED lights on the front and above the roll, which is convenient for observing the running status of the machine.

Technical Parameters
ModelFH18-65ZDs
Production Capacity40-100cans/min
Can Diametre Range65-180mm
Can Height Range60-320mm
MaterialTinplate/steel-based/chrome plate
Tinplate Thickness Range0.2-0.35mm
Applicable material Thickness1.38mm 1.5mm
Cooling WaterTemperature :<=20A AcA A A A Pressure:0.4-0.5Mpa
Discharge:10L/min
Power Supply380VA A A A 5% 50Hz
Total Power40KVA
Machine Measurements1750*1100*1800
Weight 1900kg