Flush Bottom Valve By Micro Pneumatics Pvt. Ltd.

We are a reckoned manufacturer, exporter and supplier of an enhanced quality Flush Bottom Valve. The offered valve is manufactured using the high grade raw material and sophisticated technology in adherence with the prevalent quality standards. This valve is most commonly used in flush tanks and is mounted at the bottom of the tank. We provide the offered valve in Single piece, 3 piece and can be customized as per needs of the clients. Furthermore, clients can avail this Flush Bottom Valve from us at affordable prices.The unique MICRO 1" to 4" Flush Bottom Ball Valve find application in dumping / delivering 100 % stock from the reactor, Vessel, Kettle etc. The special featured Flush Bottom Ball Valve when mounted on the vessel pad opens along the vessel inner surface, avoiding cold zone pocket carefully profiled to fit Tank Bottom. Body-Ball Cavity filler prevents entrapment leading to contamination, hazards and production loss. Quarter turn Flush Bottom Valves are low torque and quick flushing. The acutely mounted actuator avoids automation system falling with the vessel. The valve drains fully through straight full bore port.  Filler Material : PTFE/RPTFE/Special The photograph consists of 4"x3" Flush Bottom Ball Valve with MS-125-F12 Single Acting Actuator, 3/2 way NAMUR Solenoid Valve and Position Indicator. Features: Reliable structurePrecisely designedHigh strengthLong service life Single Piece Design: The specified size consists of one higher size flange for the tank mounting and the Flush Bottom Valve is bolted to the tank bottom with gasket for all opening in to the tank.3 Piece Design: The Flush Bottom Valve flange becomes the bottom pads of the tank and additional pad is not required. The valve flange is directly welded to the tank bottom, valve body and discharge side flange bolted to the welded pad.Both designs featured with inclined bonnet which allows the automation or manual operation to be free from fouling with the reactor disc end.Mounting InterfaceISO 5211MOC of the Body CF8, CF8M, CF3, CF3M, Hastalloy(Special on request)TrimCF8, CF8M, CF3, CF3M, Hastalloy (Special on request)Seat/Cavity FillerPTFE, RPTFE (Special on request)Size1" to 10"