Frp Lining Services - Durable Fibre-reinforced Plastic Coating | Leak Proofing, Anti-corrosion, Chemical Resistance, Expert Application

p { margin-bottom: 0.08in; }

Our organization offers reliable services of FRP
(Fibre-reinforced plastic ) Lining to our customers. These
services are rendered by our highly skilled professionals, who have
immense expertise in their respective domains. Our offered services
is widely used in diverse applications such as leak proofing of roof
tops, tank lining in chemical industries, anti corrosion treatment of
metal tanks and many more. These services are capable to withstand
harsh conditions, thus widely demanded in various industries.
 
Safety:
 
The tank to be lined should be
thoroughly emptied and clean

Vapor in the tank should be purged to reduce
inhalation hazards


 
Surface Preparation:
 
Concrete

Holes in the floor greater than an
inch diameter are repaired by welding metal plates over them and
patched by putty

Check the moisture contents with
moisture meter, to make sure an ideal moisture 4% - 10% Max

Metal

The surface must be free of scale,
oil and grease

Sand blast to near white color


 
Prime the clean surface:
 
The metal and concrete surface are protected by brushing on a
epoxy resin Duracoat-009-PD and Hardener Duracoat-40-H, to increase
bonding strength between FRP to metal and concrete

 
Apply The Laminate:
 
All areas to be lined with Glass
Mat and Polyester or vinyl ester resin as specified

The standard of glass is E glass
that would be reinforcement layer

The resin and glass are to be
worked down with special grooved

Roller and brushes in order to minimize the surface free of
pin holes and air pockets


 
Apply the corrosion barrier:
 
After apply the laminate as reinforcement layer, surfacing
veil as the corrosion barrier should be applied with polyester or
vinyl ester as specified

 
Spark test:
 
Before applying the finish coat,
all surface to be inspected to found any pin holes with spark test
machine

Any pinholes detected and found, would be repaired at this
time


 
Finish coating & hardness test:
 
Polyester and vinyl ester
finishing coating would be brushed on the surface, mix the resin
with wax additive and pigment color as specified

Make sure the hardness surface with barcol harness test
machine