Heat Pipe Solar Collector - 99.93% Pure Copper Heat Pipe, Aluminum Alloy Frame | High Efficiency Heat Absorption, Independent Tube Functionality, Cold Weather Resilience

Use Heat Pipe Solar Collector to supply hot water. This Heat Pipe Solar Collector can work under certain pressure and supply water to high and far place.
1) Combines glass vacuum tube and copper heated pipe to form a heat pipe tube.
2) No matter in copper heated pipe, which shortened the heating time.
3) Without water in glass vacuum tube, product can be used in cold weather of -30 Celsius degree.
4) Widely used for pressurized solar water heaters and solar projects.
5) Individual tube can work independently, solar water can sttill work in case of tube is broken.
The warranty time of tubes are as long as 15years.
Feature:
1. Can be matched with any low pressure, high pressure hot water system.
2. Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.
3. Easy plug-in design and installation.
4. Corrosion-resist aluminium manifold and frame.
5. Optional 38A /45A frame can resists wind with a velocity of 36m/s.
6. Can supply hot water to large amount water need.

Inner manifold material:Red copper channel
Outer shell material of manifold :Aluminium alloy
Frame material: Aluminium alloy
Heat pipe material: 99.93%pure cooper & lead free,45% silver brazing
Rubber seals and Rubber rings :HTV grade silicone rubber
Optional installation angle: 0A ,30A ,38A ,45A
Maximum operating pressure:12bar
Optional flow rate:0.1L/min/tube 0.026G/min/tube
Vacuum tube: I 47-1500mm,I 58-1800mm with heat pipe
Daily efficiency: 55%(42% in winter)