High Speed Wire Nail Making Machines

MANN High Speed Wire Nail Making machines are fully automatic - Wire Feeding unit and Clamping of Wire through Conical Rollers, Heading Operation, Point Forming and process of finished Nails is completed automatically
Technical Specifications vary with chosen Model of the Machine for Wire Diameter, Length of Nail and Production.

Main Features
Solid main bed bushes increase the bearing surfaces and eliminate deformations; - with Fluent Lubricating Oil Film ensures long life of bushes
The flywheel is mounted on a support independent from the main crank-shaft which therefore is not affected by stresses produced by the freewheel itself and by the drive belts;
Spiral Type Bevel Gears run in continuous Lubricating System and need no maintenance and are noiseless.
The round section hammer slide allows a correct alignment with the connecting rod, a larger support surface and an excellent lubrication; moreover an air circulation system cools the slide's running guide and keeps dirt away from the slide itself;
The nails ejector is driven by a cam; so there is no contact between the punch and the ejector;
The Crank Shaft and Lateral Shafts are of High Quality Steel fully ground and are counter-balanced to extend cutters life;
Cutters and grippers are adjusted by means of vertically positioned screws operating on the wedges;
The grippers die box is made up of two slides; the stationary gripper is mounted on the former, the sliding one is mounted on the latter that offers large bearing s