High Strength Vehicle Circuit Tester

We are manufacturing, exporting and supplying an exclusive range of High Strength Vehicle Circuit Tester. This tester is a multifunctional vehicle circuit tester with a monolithic processor and a liquid crystal display. It can be used to measure DC voltage, continuity, and the amount of current in fuse. Because the tester uses a new method to measure current, it is unnecessary to remove the fuse; just connect the two probes to the two terminals of this fuse. It can measure a DC voltage as low as 0.1mV.

Connect the test lead, according to the size of the fuse to be tested and the rated current mark on this fuse, determine the type of this fuse and its rated current, or use USER DEFINE mode to measure the current of a fuse. Connect the test leads to the two terminals of the fuse to be tested (for blade fuses, connect the test leads to the two contacts on the top of fuse). The primary display indicates the amount off the current in the fuse under test.

Features
Overrange indication: "OL" shown on the primary display
Open Test Loop Indication
Negative Polarity Indication
Low Battery Indication

Specification
Display: 4-digit LCD, with a max. reading of 9999
Battery: 9V battery, 6F22 or equivalent, 1 piece
IP Degree: IP20
Size: 143A 84A 36mm
Weigh: about 177g (including battery)
DC Voltage: 0.0~50.0V
Continuity: 40IC
Fuse Current: 0.1~99.9A (USER DEFINE mode)
0.1~50A (Other mode)
Fuse type/Rated current
Maxi Fuse (MAX): 5/7.5/10/15/20/25/30A
Standard Fuse (STD): 5/7.5/10/15/20/25/30A
Mini Fuse (MIN): 30/40/50A