Hydraulic Transfer Press - 4mn Pressing Force Stroke Of 400mm | Adjustable Pneumatic Balancing Central Lubrication Overload Protection

These Hydraulic Transfer Press is a two-point crank press with one or two drawing slides. The basis of the press is a welded upper cross beam in which the crank mechanism is longitudinally placed. The mechanism is driven by an adjustable-speed electric motor. The press has central circulation -type lubrication soft start-stop clutch and brake pneumatic balancing adjustable according to the tool weight overloadn protection in slide and looking device of slide. Each working station of the slide has adjustment.
Total pressing force(25 mm before bottom dead centre) 4MN
Forming quantity of work( at number of strokes 14/min. and 20% flywheel speed decrease)75kJ
Max.permissible pressing force for individual tools at positions 2 till 11 15MN
Max.permissible shearing force at the position 11MN
Number of tools positions incl.shear cut 11
Distance between tools400mm
Stroke of the tensile ram400mm
Max. tensile depth135mm
Tools displacement at positions 2 till 1150mm
Stroke of the shear ram60mm
Shear tool displacement pos.120mm
Distance between upper surface of the moving out table and under edge of the tool holder ram in the bottom dead centre displacement of the upper tool holder at working positions 2 till 11 720(650)mm
Distance between upper surface of the moving out table and bottom surface of transfer bars 400mm
Distance between gripped transfer bars can be set into positions460 or 710mm
Number of working ram strokes14 till 281/min.