Lv Series Clean Agent Fire Suppression System - Ce Approved, 1.2x0.55x0.55 Meter , Red Color, 20 Kilograms Weight, 230 Volt Input Power, 50 Hertz Frequency, 100â°c Temperature Range, 12 Months Warranty | Electric Panel Protection, Low Odor, Non-conductive Extinguishing Agent

The Lv Series Clean Agent Fire Suppression System utilizes 3Ma c Noveca c 1230 Fire Protection Fluid as the extinguishing medium. Novec 1230 fluid is a clear, colorless and low odor liquid perfectly suited to protect high value assets in areas that may be normally occupied, in locations where clean-up of other agents is problematic, when storage space for a fire suppression agent is restricted, or when an electrically non-conductive agent is required. Each system consists of the following components and their associated accessories: 1. Agent Storage Components - Storage components consist of the cylinder assembly(s), which contains the Novec 1230 fluid, and the cylinder bracket(s), which holds the cylinder assembly securely in place. 2. Agent Fluid Distribution Components - Distribution components consist of the discharge nozzles used to introduce the Novec 1230 fluid into a protected hazard along with the associated piping system used to connect the nozzles to the cylinder assembly. 3. Trim Components - Trim components complete the installation of the suppression system and consist of connection fittings, pressure gauge, low-pressure supervisory switch, electric valve actuator, and manual valve actuator. 4. Slave Arrangement Components - Slave arrangement components consist of the pneumatic valve actuator(s), actuation check valve, vent check, actuation hose, and fittings required for a multiple cylinder (slave) arrangement. 5. Supplemental Components - Supplemental components include the discharge pressure switch and manifold check valve. They supplement the core equipment or complete a specific multicylinder configuration. 6. Control Panel - This device monitors the condition of the electric actuator, detectors, warning devices, cylinder pressure, and any manual release and abort stations. All electric or electronic devices must connect to the control panel in order to function. 7. Detection and Alarm Devices - Detection devices coupled with manual release and abort stations maximize.

Novec 1230 Fire Suppression System Mainpuri, Novec 1230 Fire Suppression System Maharajganj, Novec 1230 Fire Suppression System Hapur, Novec 1230 Fire Suppression System Amroha, Novec 1230 Fire Suppression System Ambedkar Nagar, Novec 1230 Fire Suppression System Kannauj, Novec 1230 Fire Suppression System Chandauli, Novec 1230 Fire Suppression System Sahibabad, Novec 1230 Fire Suppression System Budaun, Novec 1230 Fire Suppression System Sonbhadra, Novec 1230 Fire Suppression System Modinagar, Novec 1230 Fire Suppression System Banda, Novec 1230 Fire Suppression System Shamli, Novec 1230 Fire Suppression System Hamirpur, Novec 1230 Fire Suppression System Auraiya, Novec 1230 Fire Suppression System Sant Kabir Nagar, Novec 1230 Fire Suppression System Balrampur, Novec 1230 Fire Suppression System Jalaun, Novec 1230 Fire Suppression System Kaushambi, Novec 1230 Fire Suppression System Sikandrabad, Novec 1230 Fire Suppression System Lalitpur, Novec 1230 Fire Suppression System Orai, Novec 1230 Fire Suppression System Siddharthnagar, Novec 1230 Fire Suppression System Mahoba, Novec 1230 Fire Suppression System Shrawasti, Novec 1230 Fire Suppression System Jyotiba Phule Nagar, Novec 1230 Fire Suppression System Jagdishpur, Novec 1230 Fire Suppression System Gajraula, Novec 1230 Fire Suppression System Chitrakoot, Novec 1230 Fire Suppression System Uttar Pradesh, Novec 1230 Fire Suppression System Karchana, Novec 1230 Fire Suppression System Sant Ravidas Nagar, Novec 1230 Fire Suppression System Simbhaoli, Novec 1230 Fire Suppression System Mandi, Novec 1230 Fire Suppression System Fatehabad, Novec 1230 Fire Suppression System Lakhimpur, Novec 1230 Fire Suppression systems.