Blue And Also Available In All Colors Otdr Fiber Ranger (Bliy India)

We are involved in making exporting distributing whole selling and supplying OTDR Fiber Ranger (Bliy India) in Puri Odisha India.

Overview
SGOT04 is a portable optical fault searcher using the principle of OTDR and integrating with
powerful analysis software which can detect the location and type of optical fiber fault rapidly
and precisely.
Light weight appearance small size light weight and convenient to carry.
Reliable performance and good repeatability.
One-touch operation and simple settingswith clear result
Detect node length and fault location on link simply
Integrated visual fault location system convenient for detecting fault location in dead zone
Silicone keypad providing comfortable operation.
Use three 1.5V AA alkaline battery supporting long working and convenient for changing
especially suitable for long-time field operation
The device is suitable for the construction of access network based on FTTX and fault location in
maintenance.
Main Function:
Measure optical fiber length and locate fault point.
Measure the distance between two node in fiber
Detect the restoration of fiber
2a Technical Indicator
Type
SGOT04
Operating Wavelength
1550nmi 1310nm availablei
Fiber Type
9/125um single mode fiber
Joint Type
FC/PC
Sensor Type
InGaAs
Laser Peak Power
a Y60mW
Maximum Display
Distance
Reflective Event
60kmi a Y1dBi
Non-reflective Event
20km(a Y2.5dB)
Measurement Unit
m
Reflection Event Dead Zone
15m
Distance Accuracy (Reflection Event)
A i 2m+2*10 distancei
-4
Visual Fault Locator Wavelength
650nm
Visual Fault Locator Power
a Y1mW
Power Supply
Three 1.5V AA alkaline batteries
Battery Operating Time
a Y5000 times measurement
Operating Temperature
-5-40a
Storage Temperature
-10-60a
Humidity
0-85%i no condensationi
Weight (without battery)
350g
3a Standard Configuration
Item
Name
Quality
mainframe
SGOT04
1
accessory
specification
1
desiccant
1
Oxford cloth bag
1
1.5V AA alkaline battery 3
(available)
4a Function Declaration
4.1
Power button: When the device is in shutdown press the button to power on. When the device
is on press the button to switch auto power-off. Press the button for three seconds to power off
the device. When the battery mark shows at the top-left corner of screen the device will be shut
down after above 5 minutes without keys operation.
SCAN: In measurement pattern press this button to start up OTDR to measure the optical fiber
and display the result on screen. Press the button for 5 seconds to enter loop test with mark A
at the top-left corner of screen. In automatic loop test press the button once again to exit
automatic loop test.
Up Arrow: In measurement pattern press the button to check the last measured value among
multiple values. In refractive index modification pattern press the button to modify refractive
index adding 0.0001 each press.
Down Arrow: In measurement pattern press the button to check the next measured value
among multiple values. In refractive index modification pattern press the button to modify
refractive index reducing 0.0001 each press.
IOR: In measurement pattern press the button to display the current refractive index and modify
with up and down arrow. Press the button once more to save and go back to measurement
pattern.
GLINT: In measurement pattern press the key to enter visible fault location test pattern and
press once more to return to test pattern.
4.2 Operating Instructions
4.2.1 Power on and enter measurement mode