Pb 30 Shot Permitted Type Internal

PB 30 Shot Permitted Type Internal We are engaged in trading, exporting and supplying the finest quality PB-30 Shot Permitted Type (Internal) that is manufactured using world-class components and sophisticated technology in adherence with set international standards under the surveillance our vendors ingenious professionals. The equipment provided by us is best suitable for firing 25 shots in underground gassy mines. This equipment comprises rechargeable A Type Alkaline / NI-CD / NI-MH /LI-ION with minimum 700 Mah capacity battery that provide excellent working time. Additionally, offered PB-30 Shot Permitted Type (Internal) is made available in various technical specifications at market leading rates. Features: Powerblast Exploder will not charge if the connected circuit has higher resistance then recommended, or the circuit is open. Powerblast Exploder does not fire till the rated output is attained, when the firing switch is pressed. Powerblast Exploder is provided with low battery indicator which gives warning that the battery is low and gets internally locked till the battery is replaced or charged. Powerblast Exploder is very simple to operate: First check the instrument by inserting the key and turning it clockwise for the condition of the battery."L" indicates low battery and dot (.) indicates that the exploder is " ON " Connect the external circuit leads to the exploder output terminals. By turning the inserted key clockwise the letter "C" will appear on the dial indicating that the circuit is In order. Keep the key in clockwise position until the letter "F" start flashing. Press firing switch to explode. Instruction for Use: Insert operating key and turn clockwise to 60, the Exploder will indicate "C" & then "F" starts flashing when full charge is attained. Press firing switch to explode Replace OR charge battery for 16 hours continuously when low battery indicator starts flashing Checking: The capacity of the Exploder may be tested by special powerblast Exploder tester. We are majorly looking queries from Africa, Australia and America. Technical Specification: Max. Circuit Resistance 160 Ohms with cable Firing Current 1.2 Amps. Energy 1.21 Ws Firing Tension 510 Volts. Duration of Firing Current < 4 ms at 160 Ohms Circuit Resistance Continuity Sensing Voltage & Current Open Circuit Voltage - 5 Volts Short Circuit Current - 5 Ma Max. Batteries AA Type Alkaline / NI-CD / NI-MH /LI-ION with minimum 700 Mah capacity. (6 Nos.) Working Temperature -20 to +55 degree celsius Height 180 mm Width 95 mm Weight 2 Kgs. Approx. Length 155 mm Send Enquiry