Porta Cabins By Arkad Cabin

We are a renowned firm engaged in offering a huge assortment of Porta Cabins. These cabins are manufactured as per the set industry standards using high quality components and advanced technology. Offered cabins are extensively demanded in both commercial and residential sectors. Further these cabins are fabricated robustly and precisely check on different quality parameters by our quality controllers. These Porta Cabins are highly demanded in the industry due to their features like high strength durable finish standards and light weight.Base Frame of portable offices Base frame used are of pressed mild steel channel section Main structural element are of 'C' Channels 100 mm x 50 mm and cross member is of 'C' channels section size 75 mm x 40 mm   Side & end frames made out of pressed sections of suitable profiles/pillars of sufficient strength 9 mm MDF board used for interior walls All steel sheets used are treated for corrosion resistance Vertically corrugated Sheet Panels that are continuously welded to top side and base structures to offer better strength to weight ratio All gaps sealed at edges & at seams bottom etc. for preventing ingress of moisture Flooring Systems of portable offices Bottom frame provided by 18 mm thick plywood bison panel/E board (fixed by means of self taping screws) PVC vinyl flooring fixed on a panel Roof of portable officesInterior panelling is done in 9 mm MDF board with adequate insulation Paint of Portable offices Epoxy Zinc Phosphate primer and synthetic Epoxy paints used for final 2 coats (Corrosion free and fire proof paints) Insulation of Portable offices 25 mm thick Glass wool insulation used for walls as well as 50 mm thick Glass wool insulation provided for the roof Inner Panelling of Portable offices Aesthetically finished Interiors that provides the custom built appearance with high quality workmanship All vertical & horizontal corners neatly and smoothly finished with Aluminium sections The panelling of side walls & roof is about 9 mm thick decorative laminated MDF board Main Entry Door of portable offices The door interiors finished with same materials matching with that of the bunk house interior Doors provided with locking arrangement with separate handles on both sides of door as required Aluminium Windows of Portable offices Aluminium sliding type powder coated windows that are made of aluminium section which is 4 mm thick tinted glass. Electrical System of portable offices Portable offices provided with concealed electrical copper cables & wiring suitable for 250 volt 50 HZ single phase AC power supply Copper cables used are of 3/19 cable for lighting circuits ISI mark & concealed PVC conduits insulated copper wire used for wiring in PVC conduit with a small size distribution board with MCB protection and to separate with main supply.