Pulley Torque Sensor - Aluminum, Customizable Dimensions | 100nm To 10000nm Torque Capacity, High-accuracy ±0.5%, Non-contact Measurement, Excellent Noise Immunity, Portable Use

This sensor can be adapted to a wide range of belt drive systems and can be installed in a dynamometer test stand or on vehicle. Various torque capacities and pulley gears can be designed to meet your specific requirements.

Features
1.Direct replacement for standard pulley / sprocket
2.Low inertia - High Speed capability because electronics are not fixed on to shaft
3.Non-contact/brushless measurement - simple RF couple for power/signal transmission
4.High bandwidth 10kHz
5.300% mechanical safe overload
6.High accuracy and resolution
7.Excellent noise immunity
8.Seperate digital electronics
9.Operates both statically and dynamically - Clockwise and anti-clockwise
10.Any full scale torque can be specified within the standard range:
11.100Nm through to 10000Nm
-High torsional stiffness
-Insensitivity to belt/chain tension loads on torque readings
-Elimination of torque error due to bearing losses in jack shaftassembly
-Measurements of torque a at the sourcea
12.Adaptable for portable usage
13.No special adapter tools required
14.Precision repeatable torque measurements
15.Calibration reference for a hard usagea mechanical torque wrenches
16.MTS-58 pulley/sprocket transducers are suitable for torque monitoring and process control on any torque wrench test and calibration
17.Supports non-contact frictionless sensors.
18.Support BLDC, PMSM, PMDC, Induction, Stepper motors.
19.Motor power switching is done automatically by the system.