Rfid Card Reader - Pvc Case, 124mm X 76mm X 23.5mm | Built-in Antenna, Led Indicator, Loud Speaker, Less Than 0.2s Response Speed

We are able to provide our esteemed clients with RFID Card Reader. These products are very durable and reliable as these are able to support UEM 4100 ID card or Mifare 1 Card plus, have less than 0.2 second response speed. Our products are featured with a built-in antenna, a built-in LED and a built-in loud speaker. The offered products run in DC 12V working voltage and 70mA working current. The RFID Card Reader is very easy to install and convenient to operate.Specification:Wiegand 26bits/ Wiegand34bits /ABA standard format data outputLess than 0.2 second response speedLess than 0.5 seconds proximity time distance: 2-15cm proximity rangeSupport UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) or mifare 1 Card (13.56 MHz Frequency)-25A AcAca A A a to 75A AcAca A A a ambient temperature,10%-90% ambient humidityBuilt-in antennaBuilt-in LED (double color LED)Built-in loud speaker (buzzer)DC 12V working voltage,70mA working current100 meters communication distanceReal time data transferBlack colorPVC case material (black resin for water-proof Ffnction)124mm*76mm*23.5mm InstallationUsing + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws. Wire ConnectionRed DC 5V-16VBlack GNDBlue D1White D0Brown BEEPGreen LEDYellow AlarmNotice1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply2. When external Power is used, make sure sharing the power with Controller Box or using the same GND3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires