Rockwell Cum Brinell Hardness Testing Machines Trs

Rockwell Cum Brinell Hardness Testing machines TRSN
TRSN Series - Rockwell, Rockwell cum Brinell, Rockwell cum Superficial
Hardness Testers are manufactured under strict quality control at all
manufacturing stages. These models are suitable for testing hardness of
metals and alloys of all kinds, hard or soft, whether flat or round
etc. or of irregular shape. These models are having superior design to
that of existing conventional Rockwell Hardness Testers & easy to
operate still quite sensitive & accurate.Salient Features


FTM make Hardness Testers model TRSN, TRSN-B and TRSN-T are manually operated.Machine is having different Taper front look & equipped with
Big dial gauge and superior aesthetic look over conventional Rockwell
Hardness Tester.The machine is powder quoted & paint shade does not fade over the years of use.Most of the important parts are plated to avoid rusting.An antifriction linear bearing is fixed in Hardened & ground
stepped bush which will provide perfect vertical movement of diamond
holder. Thus the testing of small pin or ball upto 3mm dia is possible.All models conform to -Results are displayed in BIG Font sizeIS : 3804 BS 10109-2 & ASTM-E-18 for Rockwell Test.IS : 5073 BS 10198-2 & ASTM - E-18 for Rockwell Superficial TestIS : 2281 BS 10003-2 & ASTM - E-10 for Brinell Test.Automatic Load Selection for all models.Motorized version of all models is also available.
Technical Specifications


Model
TRSN
TRSN-B
TRSN-T


Test Loads (Kgf)
60, 100, 150 (Rockwell)
60, 100, 150 (Rockwell)
187.5, 250 (Brinell)
60,100,150 (Rockwell) 15, 30, 45 (Rockwell Superficial)


Initial Loads(Kgf)
10
10
10 (Rockwell) and 3 (Rockwell Superficial)


Max. Test Height (mm)
222
222
222


Depth of Throat (mm)
130
130
130


Size of Base (mm) (Approx.)
450 x 265
450 x 265
450 x 265


Machine Height (mm)
627
627
627


Net Weight (Approx.) kg.
65 Kg.
70 Kg.
70 Kg.

Standard Accessorie



Model
TRSN
TRSN-B
TRSN-T


Rockwell Diamond Indenter
1 No.
1 No.
1 No.


Superficial Diamond Indenter
-
-
1 No.


Testing Table 50mm
1 No.
1 No.
1 No.


Testing Table 40 mm with 'V' Groove for round Jobs 6 to 45 mm
1 No.
1 No.
1 No.


Steel Ball Indenter 1/16"
1 No.
1 No.
1 No.


Steel Ball Indenter 2.5 mm
-
1 No.
-


Steel Ball Indenter 5 MM
-
1 No.
-


Test Block HRC
1 No.
1 No.
1 No.


Test Block HRB
1 No.
1 No.
1 No.


Test Block HB 2.5 mm/187.5 Kgf
-
1 No.
-


Test Block Rockwell Superficial 30N
-
-
1 No.


Steel Ball 1/16"
5 Nos.
5 Nos.
5 Nos.


Allen Spanners
3 Nos.
3 Nos.
3 Nos.


Clamping Device
1 No.
1 No.
1 No.


Brinell Microscope
-
1 No.
-


Telescopic Sleeves for elevation screw
1 Set
1 Set
1 Set


Instruction manual
1 Book
1 Book
1 Book