Rust Converter - Organo-complex Compound For Non-porous Coating | Excellent Mechanical Stability, Abrasion Resistance, Anti-corrosive Properties

Our range of Rust Converter converts adamantly adhearing rust in to an organo a complex compound, resulting in the formation of a non-porous and moiture a repelling coating of good mechanical stability, brasion resistance, bond strength and excellent anti-corrosive properties. This coating is an ideal base for the subsequent protecting coat of paint. Brush or dip, as needed.
PROCESS:
* The surface to be treated should be free from heavy oil, greace etc.
* Remove loosly adherent rust from the surface, using a wire brush.
a c Dip the component in RUSEATER-RC 500 for 2 to 3 minutes. You also apply the chemicals by using a brush.
a c Within few minutes, rust would have been converted in to a ferrosoferric coating. Incase the atmosphere is not highly corrosive; the treated surface may be stored even in open yard.
If you wish to paint or give any other coating, rinse the surface with water after a minimum 24 hours., ensure that the surface is thoroughly free from residual chemical and absolutely dry and then paint.