Kemklin-102 - Phosphoric Acid Based Rust Remover | Efficient Rust And Scale Elimination For Ferrous And Non-ferrous Metals, Minimized Paint Blistering, Excellent Adhesion Base

Rust remover chemicalKemklin -102 (Rust Remover) is specially formulated to remove rust and scales from ferrous and non-ferrous metals effectively by hot dipping process. Rust remover chemical is purely based on phosphoric acid enriched with various types of solvents/surfactants/Inhibitors and wetting agents etc. This Rust remover chemical also minimizes paint blistering removes the oxide film rapidly and serves as a good base for paint adhesion. Carry over into phosphate bath will not only interfere with kemklin-102 chemical. It involves no expensive equipments for operations. Product Specifications a. Colour Light Green Liquid b. Chemical Composition Blend of different types of acids with inhibitors, solvents, emulsifiers etc. c. Odour Slightly Pungent d. Foaming Tendency Nil e. Reliability Good f. Handling Avoid Skin Contact g. Solubility Good h. pH Acidic Range I. Toxicity Nil j. Flash Point Nil k. Pollution Hazard Moderate Product Operating Data Concentration 25% v/v Temperature 45-50oC Dip Time 10 minutes Pointage By Dip Product Operating ProcedureFill the tank with of water and add KEMKLIN-102 at concentration 25% v/v, mix it thoroughly and fill the water to the operating level. The immersion time required for cleaning depends upon the amount of contamination, concentration and temperature. Bath should be maintained at the recommended pointage and temperature. Product Application EquipmentsKemklin-102 tank should be lead lined, rubber lined, glass fibre, rigid polythene, stainless steel tanks made out of 18 guage sheets preferred. Steam coil or heaters should be lead or 316 SS. Testing and Control Procedure Pipette out 10 ml. of the bath solution and add 90 ml. of water to itPipette out 10 ml. of diluted solution in a conical flask and add 2-4 drops of methyl orange indicatorTitrate it with N/10 Sodium Hydroxide solutionThe colour changes from red to yellowFreshly prepared 25% concentration kemklin-102 solution give the reading of 20-25 ml. Iron ConcentrationPipette out 10 ml. of bath solution, and add 10 ml of 50% concentrated sulphuric (H2SO4) acid. Mix it thoroughly, titrate this against N/10 potassium permanganate (KmnO4) solution till the pink colour persists for 15 seconds. % of iron is to be calclated as Burette reading X 0.056. Maximum permissible limit of Iron in Kemklin-102 bath is 7% Chemical ReplenishmentThe bath should be discarded when addition of concentrated solution and increase in the temperature does not show faster derusting action and powdery deposits appear on the surface of the metal. Safety MeasuresKemklin-102 is an acidic liquid material, and while handling proper care should be taken. Protect your eyes, skin by means of goggles, aprons, gloves etc. If it comes in contact with skin and eyes, wash thoroughly with a flush of water and get medical advice. General InformationRust removal: GoodPaint Adhesion: GoodGloss Retention: Good.