Single Output Tubular Battery

We bring forth our vast industrial experience and expertise in this business, involved in manufacturing and providing MGR Tubular Battery in Bengaluru, Karnataka, India.

Product Details:
Body Material:Plastic
Model No:C-10
Capacity:>150 Ah
Voltage:12 V
Output Type:Single
Battery Type:Tubular Battery
Frequency:40-50 Hz
Brand:MGR

Merits/Advantages:
Use of hybrid alloy and pressure die-casting process coupled with high purity of active materials used
Enhances the life of the Battery, prevents leaching of antimony into the Electrolyte whereby self discharge is minimum
Renders low maintenance characteristics to the battery and hence less topping up
Builds adequate back emf and resists over charging. This protects the charging system apart from savings on electricity
Increases life span of the battery


Use of special additives and expanders in the negative paste formulation:
Renders the batteries suitable for deep discharge applications
Renders the batteries suitable for deep discharge applications
Prevents negative growth
Improves terminal voltage


Use of Poly-ethylene separators has several advantages:
As they have good mechanical strength and are free from pin holes chances of failure of battery on this account is not there
Since Poly-ethylene Separators have High Porosity & Low Electrical Resistance, the voltage drop across the terminals when the battery is on load is less
Reduces temperature build up inside the battery
Increases power output from the battery


Aqua trap vent plugs:
Prevents electrolyte loss during the charging process by trapping the acid mist
The surrounding atmosphere will be free from acid fumes
Reduces the topping up frequency

Since polypropylene containers are us:
The batteries are much lighter and attractive
There is no sweating of the electrolyte
Easy to clean and maintain

Through partition Intercell connection:
Reduce intercell resistance of the battery
Prevents heating up of battery while charging and discharging
No loose contacts within the battery

Installation & Maintenance:
For initial charging, follow instructions printed on the battery
Install the batteries on an insulated surface such as a sheet of Rubber or Wooden Plank
Electrical connections should be secure to prevent sparkling & melting of terminals
Take care not to offer much load on terminals while tightening
Take care not to short circuit the terminals while tightening
Apply white petroleum jelly to the terminals to prevent corrosion
Batteries should be installed in well ventilated place sheltered from sunlight
Keep the surface of the battery clean & tidy
Check the electrolyte level periodically & top up with distilled water only if required. Never use acid to top up

Features:
Free from unwanted material
Easy to recycle
Reliability