Smarden Smart Mcb 4 Pole 63a

MCB, Miniature Circuit Breaker is an adjustable circuit breaker that has an electro-mechanical mechanism of action. The MCB is an easy solution and an alternative to fuses, to control the sudden surge of charges in the circuit. Smart MCBs are recommended as the practical evolution of regular MCBs. Smart MCB is a safe and secured option. Protect your appliances from short circuits and overloads by controlling them through your smartphones/voice assistants and Smart Dashboards over the Internet and for this purpose, you dona t need a a smart MCB boxa because your MCB itself will be a Smart Circuit Breaker.
The SmarDen Smart MCB comes with an internal wifi-based microcontroller unit that connects to the Wifi network and provides remote accessibility through the Smart Mobile application/Smart Dashboards. Since it is an MCB and with a possibility of n/w failure, the MCBs can be operated manually in an old fashioned way which gives an opportunity to control the circuit even when there is no internet availability.
Technical Specifications of Smart MCB are as follows:
Load Capacity a 63A
Poles: 4 Poles and Three-phase MCB
Communication: Wifi Based
Communication Module: WiFi Module
Works with: Mobile app or Cloud Platform
Device Security: 128-bit AES encryption in Payload
Phase line leakage current: steady-state current consumed per phase line a 0.2mA
Operating temperature: -25 A C ~ +65 A C
Operating distance from Wi-Fi router: up to 30 meters* (depending upon router and its placement)
Rated Operational Voltage: 415 V(2P/3P/3P+N/4P)
Rated Frequency: 50/60 Hz for AC
Service Short circuit capacity: 6KA
Rated Short Circuit capacity: 6KA
Rated insulation voltage: 500 V
Rated impulse withstand voltage: 4KV
Degree of protection: IP20
Protection level: IP20
Suitability of Isolation: YES
Dimensions: Three Phase (4 Pole) a 89x95x72 mm
Communication Wi-Fi: Connects to 2.4 GHz, Wi-Fi 802.11 b/g/n
Frequency (MHz): 865-868MHz
Gain: 1 dBi
Impedance (IC): 50
Connector: SMA- plug right angle
VSWR :< 2.0
Antenna Housing: Aluminum-commercial Grade
Polarization: vertical
Manual operations: Supported

Features:
Works Remotely: The device works remotely with the SmarDen Mobile application and it can be controlled from anywhere in the world. The User can control all the nodes individually from anywhere.
Scheduling: The user can schedule any individual load connected to the devices i.e. Lights, bulbs, fans, etc. to turn on/off at a specific time. Once the schedule is set the device will follow the instructions at that specific time. The user can also repeat the schedules to make it work throughout the week and at any point in time.
Routines: The User can also create a Routine depending on the requirements. In a particular routine, the user can set multiple appliances to turn on/off at a specific time of the day. Once the routine is set the devices will attain their state at that point in time. For eg. I can create a routine to turn on the Fan and turn off the lights in my room at 9 AM in the morning.
Auto-off timer: The user can also set auto-off timers for a specific appliance to turn off after a particular time. For eg. I can set the auto-off timer to turn off the lights in 50 mins.
History: The user can also check the history of any individual appliance, the history report will tell the user about the switching details of that particular appliance. In the history details, the user will get to know about the time at which the appliance is turned on/off and it will also tell a WHOa controlled the appliance. For eg. If I manually turned on the light at 9 AM, then in the history it will be updated as a manual off Action has been taken on lights at 9 AM, or if any of my family members controlled the device from the mobile app, Ia ll get to know who controlled the device and at what time the action has been taken.