Insulated Puf Panel - Galvanized Steel, 0.4mm To 0.7mm Thickness | Durable Tongue & Groove Joint, Antibacterial Coating, Moisture Resistant

Our prominent company known as a leading supplier, manufacturer and exporter of Insulated Puf Panel. It solves varied insulation problems occurring light weight pre-fabrication. It is made using modern techniques and tested materials.The joint of Insulated Puf Panel panel made with Tongue & Groove edges.It gives the flexibility of easy to assemble or disassemble.The quality and reliability of the offered store is guaranteed, thus, it ensures great stability and durability in both physical and dimensional terms.The panel insulation does not deteriorate over time and does not absorb smells and neither toxic nor irritating and also do not support development of fungi or mildew.Other details:Material : Galvanized Steel / Stainless Steel / WB Plywood & Gypsum board on request.Coating : RMP / SMP / Plastosol (200 Micron) and Microban (antibacterial coating) on request.Type : Coldstore / Clean room / Dry Partition etc. With or without Camlock, Ribs and Guard film.Thickness : 0.4mm to 0.7mm thick.Co lours : Pure White / Off white. (Other colors upon request)Insulation Foam Properties TestMeasured ValueUnitDensity Core38 - 42Kg/m3Compressive Strength> 120KpaTensile Strength150KpaShear Strength100KpaThermal Conductivity ('K' Value)0.022 (0.002)W/mCClosed Cells> 90%Water Absorption by Volume (After 24 hours)1.0%Fire Resistance UnitB3 as per DIN 4102 (B2 & PIR upon request)INSULATIONSAs per the company's green initiative, PCC ensures that all foaming agents are environment friendly and CFC free. PCC uses polyurethane as foaming agent which does not deteriorate over time and does not absorb smells. The panels are neither toxic nor irritating and they do not support the development of fungi or mildew. These products are classified as B3 & B2 according to European Fire Retardant Standard.THICKNESS & DIMENSIONInsulated Panels are available in 50, 60, 80, 100, 120, 150 & 200 mm thick and density will be 40-42 Kg/m3. The maximum length of the panels will be 12.0 m and can be produced according to the project demands. All kind of Cold room door's like Sliding, Hinged, Swing etc. are available and will be manufactured as per the standard on request.