Heat Sensing Cables

Linear Heat Sensing Cable      SpecificationsTwin-conductor switching heat sensing cable.Effective monitoring at precise point of risk.Economical, reliable and durable detectionSimple and easy to installApplied where other types of fire detection are unsuitableEnvironmental -65oC to +200C5 detection temperature ranges from 61oC to 238oCCable length 0-10KmSimple interface to any BS5839 systemFully monitoredFull range of installation accessories available various outer sheath options.Cable available pre-cut length 50m - 10,000m (50m variables)Applications:Car ParksCable TunnelsCable TrayConveyor BeltsEscalatorsMoving WalkwaysBulk Storage RacksFloor & Ceiling VoidsOperations:Digital cable operates by shortcircuiting in a fire condition or where acceptable operating temperature levels are exceeded, to provide a quick, positive and reliable signal.Digital may be used as a standalone detection facility with a sensor open circuit (FAULT) or short circuit (FIRE) condition, monitored by an associated simple electrical device.As an integral part of a fire protection system, Alarmline Digital cable may be used as a conventional detector and operate automatic extinguishing systems via an Extinguishing Control Panel (ECP).Digital is a cable and detector in one. It can be installed close to potential sources of fire, and provides economical detection for a wide range of applications.Installation:Ease of handling and stripping of the cable permits quick installation and allows conventional or proprietary methods of support to be employed.Nail type cable clips should not be used. Care must be taken to avoid mechanical impact, kinking, unacceptable heat sources or other factors which may affect the integrity and functionality of the cable.